CONCRETE DOCK

PMS produces pontoons having a width of 2.40m to 4.0m and having a length of 10.0m to 20.0m in standard conditions. When it was required PMS solved many floating concrete block productions of very large sizes as 8.0m width, 20.0m length and 2.2 to 5.0m height, especially of the breakwaters, constructed in ship yards or in site.

Standard concrete pontoons of PMS have freeboards of 0.45m to 0.55m from smaller to larger respectivley. In floating breakwater case freeboards of units are a matter of design criteria.

In all reinforced concrete blocks production, reinforment steel is hot dip galvanized. Concrete is C40, fibre. All the connection and mooring parts are either hot dip galvanized or stainless steel of high quality.

All the design and production process is certificated under ISO9001-2008 quality system.

PMS provides engineering drawings,details and calculations, approval manuals and installation manuals when ever needed.

PMS manufactures concrete floating dock units up to 2.4 m and 4.0 m and 20.0 m and 10.0 m, respectively, as standard. When the on-site production condition is achieved, the production range is up to 8.0m, 20.0m, floating blocks. Larger and longer blocks can be produced at the application site if requested.

As in width and height measurement, it is possible to manufacture besides the measurements such as overhead line, freeboard, 0.45-0.50-0.55m which is also standard in its size.

Concrete floating breakwater production was made for various projects from 4.0m width to 8.0m. Generally 20.0 m in length and 2.0 m in total height are produced up to 5.0 m. The altitude altitude and overhead line, freeboard, and measurements are handled separately for each project requirement.

Hot dip galvanized reinforced concrete steel is used in all concrete production. Concrete Fiber C40 TIR. Floating dock and floating breakwater blocks are completely hot-dip galvanized steel or stainless steel. Floating blocks are connected to each other with high carrying capacity, flexible, steel cable connection elements are used. The contact points are equipped with specially designed neoprene wedges.

ISO 9001-2008 quality management is taken as a basis in designing, projecting and production processes.

PMS is also able to provide project support for floating sea structures. In this context, there are many projects approved both by the domestic and foreign authorities.